The F114 Series luminaire shall consist of an injection-molded UV stabilized acorn-diffuser with prismatic optics, a cast aluminum cage and a mechanically fastened slip fitter (capital). The three-piece globe shall consist of an upper, frosted (stippled) UV stabilized polycarbonate section, UV stabilized prismatic acrylic or polycarbonate refractor. The upper and lower sections of the luminaire shall be riveted and siliconed together. The cage and the diffuser shall be secured to the cast aluminum fitter with stainless steel hardware. The fitter shall be made of cast aluminum and shall house a ballast assembly. The ballast shall feature quick disconnect plugs for easy maintenance. The ballast shall be factory wired, tested and mounted on a keyholed cast aluminum plate together with a 4kV porcelain socket. Lamps are not included and shall be supplied by others. All electrical components shall be UL listed and labeled.; Installation; The fixture shall slip fit onto a 3" OD or 4" OD tenon (specify) and shall be secured to the pole with three sets of two s/s hex socket screws spaced 120 degrees apart (exception: fitters "A" and "H" secure with four s/s bolts at 90 degrees apart).; Finish; All applicable parts shall receive a standard electrostatically applied thermoset polyester powder coat smooth semi gloss finish with a four part corrosion inhibiting process.
You must log in to add this fixture to a project!